NRXT8013DDC8P5 NRXT series crossed roller bearings for the rotating joints
Main application: semiconductor, NSK motors, robotics
Donghua Bearings NRXT series Crossed Roller Bearings are thin-wall bearings consisting of an inner ring, a two-part outer ring, cylindrical rollers, and separators. The rollers are oriented at right angles to each other and kept apart by separators.
This kind of NRXT series Crossed Roller Bearings can sustain axial loads in both directions as well as radial loads and strong moment loads. And with their internal clearances factory-adjusted, it can be installed directly without troublesome shim adjustment. Mounting is facilitated by the outer ring parts being inseparable.
Application:
The rotating joints of robots
Indexing mechanisms
Rotary tables
NRXT8013DDC8P5 technical specification:
Bore diameter: 80mm
Outer diameter: 110mm
Width: 13mm
Basic load ratings, dynamic: Cr=20.5KN
Basic load ratings, static: Cor=32KN
Mass: 0.38kg
With seals on both sides, internal clearance: -0.010~0mm
